Watertight Connection Solutions
- 12V 7 Pin Flat 100% Waterproof Trailer Socket.
- Tested to IPX7, IPX9K and AS4177.5
- You can even take that scenic route knowing your electrical system is protected.
- 7 PIn 12 V Round Watertight Connection System also available
- A crimping tool is available to make the crimping of the terminals much easier. Contact us for more details.
ERICH JAEGER 7P/12V EXPERT Watertight socket solutions.
The new 100% Watertight 7P/12V EXPERT Trailer Connector System by ERICH JAEGER sets the new standard in this segment. It follows our philosophy that we make connections between vehicles and trailers easier and safer.
The sophisticated, double contact system with primary and secondary lock together with individual wire seals makes the penetration of moisture into the vehicle board network impossible. Even under the most extreme conditions, the system provides 100% water-tightness. For example, the submersions of a boat trailer into the water (submerging of the connection system) is handled by our connector without difficulty.
The connector system satisfies all requirements of original equipment manufacturers in the automotive industry such as protection standard IPX7 (waterproof up to 0.5m depth) and IPX9K (protection against water during high pressure-/ steam jet cleaning). In addition to the water-tightness our new 7P/12V system has greatly simplified the installation process. (Plug & Play).
|Watertight to IPX7 (Waterproof up to 0.5m depth) and IPX9K (Hot steam jet resistant). Tested to AS4177.5|
|Easy Socket Exchange in case of repair.|
|New design compatible with existing mounting plates.|
|Waterproof Terminal Holder with Secondary Lock|
|No Terminal Screws|
|Metal Strain Relief|
|New AMP MCP 2.8 Nickle Plated Crimped Contacts|
|Discreet Door Spring|
|Door Dust/Dirt Seal|
Reinforced Mounting Lugs