The new 100% watertight 7-pin 12V connector system by ERICH JAEGER sets the new standard in this segment. It follows our philosophy that we make connections between vehicles and trailers easier and safer.
The sophisticated, double contact system with primary and secondary lock makes together with individual wire seals the penetration of moisture into the vehicle board network impossible.
Even under the most extreme conditions, the system provides 100% water-tightness. Also the draining of a sport boat into the water (submerging of the connection system) masters our connector without difficulty. The connector system satisfies all requirements of original equipment manufacturers in the automotive industry such as the protection IPX7 (waterproof up to 0.5m depth) and IPX9K (protection against water during high pressure-/ steam jet cleaning). In addition to the water-tightness our new 7P/12V system has greatly simplified the installation options (Plug & Play).
The system consists of a normal socket according to ISO 1724, type N, and an additional socket according to ISO 3732, type S. To avoid confusion with the normal system, the supplementary system features white housings, contact inserts and different contact arrangements.
Features of the 100% watertight system
|100% water barrier from plug side to cable harness side, even when a plug is connected|
|100% watertightness from cable harness side through single wire seals|
|Protection IPX7 (waterproof up to 0.5m depth) and IPX9K (steam jet resistant)|
|Contact insert with second contact safety (OE standard)|
|Easy handling for socket exchange in case of repair service (no soldering)|
|Customer branding possible if required|
|Rear cable outlet (grommet) can be positioned every 60° on the socket housing|
|New socket design with compatibility for a lot of existing mounting plates|
Features of the conventional system
|Economical system for simple requirements|
|Easy and efficient assembly|
|Different terminals (e.g. screw or flat terminals, etc.)|
|Systems specially designed for the application|
|Sockets with switches available (e.g. for disconnection of the rear fog-light or park distance control)|
|Maximum current with 2.5 mm² cores is 20 A|